Process Parameters

Included Topics:

• Module for calculating the parameters of the die casting process in the die casting machine
• Effective range of the shot sleeve diameter d0 depending on the nominal mould closing force Q
• Dependency of the maximum casting mass made of an aluminium alloy on the nominal closing force
• Casting time for zinc alloys depending on the average casting wall thickness and mould temperature
• Casting time and flow length for an aluminium die casting alloy EN-AC-AlSi9Cu3 depending on the average casting wall thickness, mould temperature before casting and flow rate of the die casting alloy in the mould cavity
• Casting time and flow length for a magnesium die casting alloy EN-MCMgAlZn1 depending on the average casting wall thickness, mould temperature before casting and flow rate of the die casting alloy in the mould cavity
• Casting time and flow length for a zinc die casting alloy ZP5 (GD-ZnAl4Cu1) depending on the average casting wall thickness, mould temperature before casting and flow rate of the die casting alloy in the mould cavity
• Influence of the holding pressure on the density of a plate with the dimensions 2007510 mm made of the aluminium alloy GD-AlSi9Cu3
• Solidification constant of the gate depending on the die casting alloy and mould temperature
• Solidification time of the aluminium alloy in the gate
• Rim zone thickness depending on the dwell time of the die casting alloy EN-AC-AlSi9Cu3(Fe) in the shot sleeve made of hot work steel, material number 1.2344 and the temperature tgk of the shot sleeve before casting

---

10 Pages